ts_computer

1.	If you received a Driver Resource CD put the CD into your CD-ROM or CD-RW drive and navigate to Printers > Epson Printers > Epson TM-T88II > ADT210E.exe. Double click on the ADT210.exe and follow the prompts to complete the install process. If you downloaded the driver from our website double click on the ADT210.ext on your desktop to start the install process.
2.	The Select OS screen appears, the default is Windows XP operating system, and US is selected for Select Install Language. Accept the defaults click Next .
3.	The Select Module screen appears place a check mark in Status API, USB printer and then select the Epson TM-T88II Receipt and the Epson TM-T88II Receipt Reduced (you must install the reduced for the driver to install correctly. After the driver has been installed and is working correctly, you can remove the reduced from your printer's folder). Accept the default to Overwrite file by version click Finish .
4.	You must restart your computer for the changes to take effect click Yes to restart.

Connecting the Epson TM-T88II Receipt Printer to the Computer

The computer and the printer must be ON. Plug the USB cable into the printer then into an available USB port on the computer. If the printer has been connected correctly, a pop-up screen will appear on the lower right-hand corner of the screen stating that your new hardware has been installed and is ready to use. However, you must change the printer's communication port before you can print to the printer.

Changing the Printer's Communication Port

1.	Go to Start > Settings > Printers & Faxes
2.	Right click on the Epson TM-T88II listed in the printer's folder and left click on Properties.
3.	Click on the Ports Tab to bring to the forefront. Locate the TMU... in the list and put a checkmark in the box to select. Click OK and close back to the desktop.

NOTE: If you do not see the port in the list on the Ports Tab then the driver did not install correctly and you will need to remove the driver and reinstall. If you have an HP printer installed as a USB on the computer that you are attempting to install the driver for the Epson TM-T88II you will have problems getting the driver to install. You may need to remove the printer.