ts_pole_display

My pole display doesn't work

Serial Connection:

1.	Check all cables to make sure they have not come loose or have been disconnected. If the cables have become loose or have been disconnected, shut-down the computer before reconnecting any cables to the decoder box or to the computer. When all cables have been reconnected, turn the computer on.
2.	Open The Uniform Solution program to to Setup > This Computer > Pole Display and make sure a check mark is in the box " A customer pole display is connected to this computer". Make sure the COM port is set to the correct port. The default setting is COM1. Check the pole display to see if your message appears.
3.	After you have checked all the connections, cables and setup in The Uniform Solution program and if the pole display is still not working, refer to any manuals that came with your pole display or call Premier Data Systems.

USB Connection:

1. Check all cables to make sure they have not come loose or have been disconnected. If the cables have become loose or have been disconnected reconnect the cables. Do not shut-down the computer. The computer should be on when connecting or disconnecting most USB devices.

2. Open The Uniform Solution program to to Setup > This Computer > Pole Display and make sure a check mark is in the box " A customer pole display is connected to this computer". Make sure the COM port is set to the correct port that was created when the drivers were installed. The default setting is COM1. Check the pole display to see if your message appears.

3. After you have checked all the connections, cables and setup in The Uniform Solution program and if the pole display is still not working, refer to any manuals that came with your pole display or call Premier Data Systems.

Technical Support is available Monday-Friday 8:30am - 5:00 pm Central Standard time. The phone number is 1-800-286-8929 Option #2.

Please have a valid support contract or be ready to purchase support time.